KE 790 Baler
KE 790 baler
- Balanced crop flow thanks to high-performance feeding system.
- Robust, heavy-duty, roller-mounted flywheel.
- Optional 2 and 3 twine knotter set
- Long working hours with 7 pcs of twine roll
- Workability in rough conditions with the needles made of cast iron
- Special designed fan providing the clearing of the knotter set in rough conditions.
- Support wheel designed for uneven ground
- Easy access from road to duty position
| BALE CHAMBER | ||
|---|---|---|
| Chamber Size | mm | 360 x 460 |
| Stroke | mm | 730 |
| Ram Stroke | Stroke / Min | 92 |
| Feeding Opening | cm2 | 1570 |
| BALE SPECIFICATION | ||
| Productivity | Bale/h | 200 |
| Bale Length | mm | 300 – 1350 |
| Bale Weight | kg | 25 – 35 |
| Knotter Set | 2 twines/ 3 twines | |
| PICK – UP SYSTEM | ||
| Pick-Up Width | mm | 1800 |
| Bar Gap | mm | 70 |
| Tine Bars | 5 | |
| Number of Tines | Item | 110 |
| BALER DIMENSIONS | ||
| Tire Right | 10,0 / 75 – 15,3 Tubles 12 PLY | |
| Tire Left | 10,0 / 75 – 15,3 Tubles 12 PLY | |
| Rear Middle Support Wheel | 16,5 x 6,50 – 8 6PR | |
| Weight | kg | 2220 / 2242 |
| Length of Baler (on road) | mm | 5530 |
| Length of Baler (on duty) | mm | 6380 |
| Width of Baler | mm | 2550 |
| Height of Baler | mm | 1870 |
| Minimum Power Requirement | HP | 50 – 60 |
| PTO drive | 1/min. | 540 |
| Transmission | 2 Shaft | |