991 LBER Single Dispenser

991 LBER Single Dispenser Linkage Wrapper

McHale’s round bale wrapper range has been designed with the demands of today’s farmer and contractor in mind. This common-sense approach to design ensures that each machine’s operation is kept simple and user friendly.

Farmers and contractors all over the world are under pressure to reduce costs and increase output. To help with this, McHale concentrate on features like the patented hydraulic ground supported bale damper system, patented high-speed transfer system, patented tip rollers, hydraulically operated cut & hold system, 750mm dispensers and high specification components.

These features ensure long working life, reliability and a machine rugged enough to handle the toughest crops, heaviest bales and roughest ground conditions.

The McHale 991 L range of linkage round bale wrappers is the first choice for farmers and contractors who are interested in wrapping bales at the storage site. The 991 L range offers the perfect blend of tried and tested technology with solid construction and reliable performance. There are three models in the 991 linkage round bale wrapper range.

The 991 LBER is fully automatic and can be controlled via the control console. The control console on the 991 LBER enables the operator to change the round bale wrapper settings and select the desired number of film layers. When set, one touch of the auto start button operates the complete cycle from start to finish. The wrapper applies the pre-set number of layers, then stops and tips the bale automatically.

Built To Last

Features

Specifications

Videos

Gallery

Ground Supported Damper System

The patented bale damper system gently lowers the bale to the ground while eliminating any stress on the chassis of the machine.

When tipping a bale, the heavy-duty damper is also lifted to cradle it, while the second arm is lowered automatically to the ground. This allows the heaviest of bales to be gently lowered to the ground, eliminating any damage.

Lift Arm & Wrapping Table

The 991 BC and BJS lift arms are operated manually. On the 991 BE and High-Speed, the auto lift function places the bale on the wrapping table automatically.

The wrapping table has four heavy-duty belts, which ensure smooth and consistent bale rotation even when dealing with loose or asymmetric bales.

Extra Film Storage with Easy Handling

The 991 L range can carry 3 rolls of film:

1 roll (dispenser) + 2 rolls (film storage)

Optional Side Tip

An optional side tip is available on all trailed machines to place bales on their ends after wrapping is complete.

This helps by:

Tipping the bales onto where they have more plastic, thus reducing damage in stubbly fields.
Allowing round bales to hold their shape better.
Stopping the bale from rolling when ejected on slopes.

Cut & Hold System

At the end of the wrapping cycle, the hydraulically operated cut & hold system cuts and holds the film in position ready to wrap the next bale.

Uniquely designed, this system works reliably and consistently in all weather conditions. The plastic is gathered to one point, cut and then pulled against the side of the bale so that tails are minimised.

Automatic Film Break Sensors

Automatic film break sensors monitor the plastic as it wraps the bale. If one roll breaks or runs

out, the operator is notified on screen and the machine switches to single dispenser mode.

It will automatically compensate to ensure bales are wrapped correctly. If both rolls break or finish at the same time, the cycle will resume when the rolls are reset.

Easy Load Dispensers

The McHale lock and load system makes film loading quick and easy by locking the dispenser bobbin up when unloading and locking it back down by simply pulling the cable.

All machines are fitted with 750mm aluminium dispensers, which provide a 70% film stretch. Other film stretch options are available on request.

Shear Bolt Unit

A Shear Bolt protects the gearbox when wrapping poorly shaped bales. All machines are now driven by a heavier gearbox than previous models.

The gears are wider in diameter and have a larger tooth module on them, making them easier to drive. This heavy-duty gearbox contains a new key way protection system, which replaces the old roll pin system.

Expert Control Console

The Expert electronic control console fully automates the wrapping process. When the auto start lift arm paddle is activated, the bale is lifted up to the wrapping table, wrapped and tipped, ready to start the process again.

Radio Remote Control Kit for Static Wrapping

With a radio remote control kit, an operator can load a bale and activate the automatic cycle remotely.

While the bale is wrapping, the operator stacks the last wrapped bale and collects a netted bale to wrap next. The wrapped bale is automatically tipped and the netted bale is placed on the wrapping table to start the wrapping process again.

Technical Specification

Dimensions & Weight

Transport Length	2.8 m (9’2″)
Transport Width	1.65 m (5’5″)
Transport Height	1.94 m (6’4″)
Height to Top of Rollers	0.83 m (2’9″)
Weight (unladen)	800 kg (1764 lbs)

Wrapping

Bale Size	1.52 m (3’3″-5′)
Aluminum Dispensers	1 x 750 mm Optional 500 mm Kit
Film Stretch	70% Standard 55% Optional
Wrapping Speed (up to)	30 rotations/min
Wrapping System	Turntable
Protection Mechanism	Shear Bolt
Lift Capacity @ 170 bar	N/A

Equipment On Each Model

Driver Control	Expert Control Console
Operation	Automatic & Manual
Radio Remote Control	Standard
Film Roll Capacity	x 3 (1+2)
Cut & Hold	Yes
Bale Wrap Monitor	Yes

Other

Road Lights	N/A
Greasing Points	11
Wheel Dimensions	N/A
Axle	N/A

Tractor

Attachment to Tractor	3 Point Linkage
Min. Hydraulic Requirements	20 l/min @ 180 bar
Hydraulic Connections	2 x 1/2″ QR’s Open or Closed Centre
Electrical Requirements	12v EuroPlug, 20A or Direct from Battery
Minimum hp Requirement	45 kW / 60 hp



Download A Brochure



01403 887720

info@balebaronuk.com

Search

991 LBER Single Dispenser